DES recently performed qualification testing on aerospace connectors which involved combined temperature and sinusoidal vibration testing, random vibration testing and shock testing. Combined temperature and sinusoidal vibration tests were performed per EIA 364-28F. EIA 364-28F required test conditions of 10-2000 Hz, 20G maximum acceleration sweeps at temperatures of -54°C and 200°C over the course of 4 hours per axis. Random vibration tests were also performed per EIA 364-28F. Random vibrations at 50-2000 Hz, 46.3 Grms were applied to the connectors for 8 hours per axis. The random vibrations were applied at room temperature. Finally, the connectors were subjected half sine shocks per EIA 364-27C. The shock requirements were three shocks per polarity, per axis at 300G over the duration of 3msec. A sample shock plot can be seen in Figure 1.
These tests demonstrate the unique capability of Delserro Engineering solutions. Not many labs are equipped to perform combined temperature and vibration testing at the extreme temperatures of this test or are able to produce the high levels required for random vibration and shock testing.
For more information on Combined Temperature and Vibration Testing or other vibration testing services, contact DES or call 610.253.6637.
Very good!